Harman Kardon HK3385 Stereo Receiver

The perfect match for a main music system, your office or that special place for relaxation, the HK 3385 is music at its best. It uses the same high-current, ultrawide-bandwidth amplifier design found in our AVR Series receivers, and has four video inputs, a phono input and a cable for direct audio/video connection to an iPod® or MP3 player, all controlled by a multicomponent remote. Let the HK 3385 make beautiful music for you.
Detailed Features

Specifications

• Continuous Average Power (FTC) Per Channel: 80 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms; 100 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms
• Input Sensitivity/Impedance, Linear (High-Level): 200mV/47k ohms
• Signal-to-Noise Ratio (IHF-A): 95dB
• Frequency Response at 1W (+0dB, –3dB): 10Hz – 110kHz
• High Instantaneous Current Capability (HCC): ±42 Amps
• Transient Intermodulation Distortion (TIM): Unmeasurable
• Rise Time: 16 µsec
• Slew Rate: 40V/µsec
• Frequency Range: 87.5 – 108MHz
• Usable Sensitivity: IHF 1.12µV/13.5dBf
• Signal-to-Noise Ratio: Mono/Stereo 73/72dB
• Distortion: Mono/Stereo 0.3/0.4%
• Stereo Separation: 40dB @ 1kHz
• Selectivity: ±400kHz, 65dB
• Image Rejection: >80dB
• IF Rejection: >100dB
• Tuner Output Level: 1kHz, ±100kHz, Dev 500mV
• Frequency Range: 520 – 1710kHz
• Signal-to-Noise Ratio: >40dB
• Usable Sensitivity: Loop 500µV/M
• Distortion: 1kHz, 50% Mod 0.8%
• Selectivity: ±10kH, >25dB
• Television Format: NTSC/PAL/SECAM
• Signal Format System: Composite
• Input Level/Impedance: 1V p-p/75 ohms, unbalanced
• Sync Polarity: Negative
• Output Level/Impedance: 1V p-p/75 ohms, unbalanced
• Video Frequency Response: 10Hz – 10MHz General
• Power Requirement: AC 120V/60Hz
• Power Consumption: 3W standby, 200W maximum (both channels driven)
• Unit Dimensions: 17.4" x 6.6" x 15"
• Unit Weight: 20.9 lb (9.48kg)