Harman Kardon AVR146 Home Theater Receiver

Affordably priced, but full-featured. The AVR 146’s sonic quality and sophisticated features make it an exceptional value. From two-input, Simplay HD™-verified HDMI™ switching to the latest Cirrus Logic® 49510 DSP, A/V Sync Delay and a high-current amplifier, the AVR 146 is modest in price, but high in performance.
Detailed Features

Specifications

• Continuous Average Power (FTC) per Channel: 40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
• Front L & R Channels: 30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Center Channel: 30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Surround Channels: 30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Input Sensitivity/Impedance, Linear (High-Level): 200mV/47k ohms
• Signal-to-Noise Ratio (IHF-A): 100dB
• Dolby® Pro Logic® I and II: 40dB
• Dolby® Digital: 55dB
• DTS®: 55dB
• Frequency Response at 1W (+0dB, –3dB): 10Hz – 130kHz
• High Instantaneous Current Capability (HCC): ±25 Amps
• Transient Intermodulation Distortion (TIM): Unmeasurable
• Slew Rate: 40V/µsec
• Frequency Range: 87.5 – 108.0MHz
• Usable Sensitivity: IHF 1.3µV/13.2dBf
• Signal-to-Noise Ratio: Mono/Stereo 70/68dB
• Distortion: Mono/Stereo 0.2/0.3%
• Stereo Separation: 40dB @ 1kHz
• Selectivity: ±400kHz, 70dB
• Image Rejection: 80dB
• IF Rejection: 90dB
• Frequency Range: 520 – 1720kHz
• Signal-to-Noise Ratio: 45dB
• Usable Sensitivity: Loop 500µV
• Distortion: 1kHz, 50% Mod 0.8%
• Selectivity: ±10kHz, 30dB
• Television Format: NTSC
• Input Level/Impedance: 1V p-p/75 ohms
• Output Level/Impedance: 1V p-p/75 ohms
• Composite and S-Video: 10Hz – 8MHz (–3dB)
• Component Video: 10Hz – 100MHz (–3dB)
• HDMI™: Switching
• Power Requirement: AC 120V/60Hz
• Power Consumption: 65W idle, 540W maximum (5 channels driven)
• Dimensions: 17.31" x 6.5" x 15"
• Unit Weight: 21.12 lb (9.6kg)